ADI Icron Product-Line - USB Extension, Media Converters
USB 2.0 Extender up to 100 m via LAN with PoE
- USB point-to-point extension up to 100 m.
- Via existion LAN/Cat 5e/6/7 cable, with PoE.
- Local 3-port and remote 4-port hub.
Simply use the existing LAN for the USB extension!
USB 3-2-1 "Switching Central"
- Flexible 4x4 USB matrix with 24 possible configurations.
- Supports USB 3, 2.0, and 1.1.
- Up to 6 W and 15 W power via USB.
Any host can conveniently connect to, and switch between, one or more devices.
The Icron USB Extenders
- USB extenders - extension via Cat5/Ethernet or fiber cable.
- Models for USB 3.1 Gen 1, USB 3.0, USB 2.0, and USB 1.1.
- Fully transparent, no drivers or software modifications required.
- Complete isolation of the transmission for the fiber models.
- Models with integrated dual or quad hub.
Overview Icron USB Interface Extenders
Model | USB1) | Max. distance | Transmission media2) | Power adaptor location | USB port(s) |
▸Raven 3204C Pro | USB 3.2, 3.1, 2.0, 1.1 | 200 m | CAT 6a/7 or LAN | LEX7) and REX | 4 |
▸Raven 3204C | USB 3.1, 2.0, 1.1 | 100 m | CAT 6a/7 | LEX7) and REX | 4 |
▸Starling 3251C | USB 3.2, 3.1, 2.0, 1.1 | 10 m | Supplied custom CAT 7 cable with ARJ45 connectors, CM or Plenum-Rated | Bus-powered, optional power on LEX | 1 |
▸Raven 3104 Pro | USB 3.2, 3.1, 2.0, 1.1 | 100 m | CAT 6a/7 | LEX and REX | 4 |
▸Raven 3104 | USB 3.1, 2.0, 1.1 | 100 m | CAT 6a/7 | LEX and REX | 4 |
▸Raven 3124 | USB 3.1, 2.0, 1.1 | 200 m | Multimode fiber | LEX and REX | 4 |
▸Spectra 3022 | USB 3.0 | 100 m3) | Multimode fiber | REX | 2 |
▸Spectra 3001-15 | USB 3.0 | 15 m | Active copper cable | Bus-powered | 1 |
▸Ranger 2304GE-LAN | USB 2.0 | 100 m | CAT 5e/6/7 or LAN | REX | 4 |
▸Ranger 2304PoE | USB 2.0 | 100 m | CAT 5e/6/7 or LAN | LEX and REX, Power over Ethernet4) | 7 |
▸Ranger 2304 | USB 2.0 | 100 m | CAT 5e/6/7 | REX | 4 |
▸Ranger 2344 | USB 2.0 | 10 km | Singlemode fiber | REX | 4 |
▸Ranger 2324 | USB 2.0 | 500 m | Multimode fiber | REX | 4 |
▸Ranger 2312 | USB 2.0 | 100 m | CAT 5e/6/7 | LEX or REX5) | 2 |
▸Ranger 2311 | USB 2.0 | 100 m | CAT 5e/6/7 | LEX or REX5) | 1 |
▸Ranger 2301GE-LAN | USB 2.0 | 100 m | CAT 5e/6/7 or LAN | REX | 1 |
▸Ranger 2301 | USB 2.0 | 100 m | CAT 5e/6/7 | REX | 1 |
▸Rover 2850 | USB 1.1 | 85 m6) | CAT 5e/6/7 | Bus-powered | 2 |
▸Rover 1850 | USB 1.1 | 85 m6) | CAT 5e/6/7 | Bus-powered | 1 |
- Where USB 2.0 is listed, USB 1.1 is also supported. USB 3.0 Spectra extenders are not backward compatible.
- Specified category cabling is a minimum requirement; higher grades are supported (e.g. CAT 6, CAT 7).
- 100 m or more is achievable when using USB 3.0 bulk traffic cameras; 50 m with storage type USB 3.0 devices.
- PoE model supports Power over Ethernet and includes three USB A ports on the LEX. An optional 24 V 1 AAC power adaptor can be connected to either the LEX or REX.
- Either the LEX or REX can use a power adapter. Only one is required.
- Up to 40 m is achievable for all USB devices; 85m is achievable for most low powered HID USB devices.
- LEX can optionally be bus powered.
Get in Contact with the Meilhaus Electronic Team: