Sefram 70 NVD Clampmeter and Multimeter
Description
Files/Downloads
Benefits des Sefram 70 Voltage Tester and Clamp-Multimeter
- NVD/voltage checker, clampmeter and multimeter in one.
- Polarity indication and continuity test.
- Unipolar test and rotary field indication.
Sefram 70 NVD Clampmeter and Multimeter
The Sefram 70 is a versatile device that integrates all functions needed for electricians: NVD (voltage checker) with self test, multimeter and clampmeter. The Sefram 70 can also illuminate the area for measurements in dark environments. The LCD display and the LEDs allow an instant reading of the measured parameters. The test leads/cords are removable and replaceable.
- Polarity indication.
- Continuity test.
- Unipolar test.
- Rotary field fndication.
- AC current measurement up to 200 A.
- Integrated digital multimeter, 4 digits.
- Lighting of the measuring area.
- Automatic start/stop.
- Voltage measurement up to 1000 VAC/DC.
- Diode test.
- Resistance measurement.
- IP2X 2 and 4 mm tip probes.
- EN61243-3 cmpliant, CAT III 1000 V and CAT IV 600 V.
- Self test.
Model overview
| Model | Sefram 70 |
| DC voltage | Range with batteries 7.0...999.9 V (0.1 V resolution); range without batteries 35...999.9 V (0.1 V resolution)* |
| AC voltage | Range with batteries 6.0...999.9 V (0.1 V resolution); range without batteries 45...999.9 V (0.1 V resolution)*; frequency response 45...400 Hz |
| Resistance | Range 9999 Ω (1 Ω resolution), 50.00 kΩ (0.01 Ω resolution) |
| Continuity | Indicator 2.7 kHz tone buzzer and RX LED |
| AC current | Range 200.00 A (0.1 A resolution); frequency response 45...65 Hz |
| Rotary field indication | For 3 phase 4 wire system only; sensitivity 90...1000 V (phase-to-ground); frequency range 45...65 Hz |
| Single-pole phase check | Sensitivity 90...1000 V (phase-to-ground); frequency range 45...65 Hz; indicator 2.7 kHz tone buzzer and ELV LED |
| Conversion rate | 3 times/s |
| Display | LCD 10000 counts; overrange display "OL" or "-OL" |
| Power supply | 2x batteries AAA (R03, LR03, 24D, 24A); battery Life approx. 1000 operations (based on Alkaline batteries, 30 s ON, 240 s OFF) |
| Maximum conductor size | 16 mm |
| Safety | IEC/EN 61010-1, IEC/EN 61010-2-032, IEC/EN 61010-2-033, IEC/EN 61010-031 for CAT IV 600 V, CAT III 1000 V, IEC/EN 61326-1, IEC/EN 61243-3 |
| Environmental (operation) | -15...+30°C/≤80% rel. humidity, +30...+40°C/≤75% rel. humidity, +40...+55°C/≤45% rel. humidity |
| Dimensions (mm) | 57 x 220 x 35; 200 g; IP65 |
* Measurement without batteries only available for <35°C, >-15°C; meter will show "bAtt" and ELV LED when measurement is not available.
Included: Sefram 70, batteries, IP2X test leads, belt cover.
Information on product safety::
Manufacturer:
SEFRAM Instruments SAS, 32, rue E. Martel, F42100 St Etienne/FRA
www.sefram.com
