MCC E-DIO24 (RedLab E-DIO24) 24-Channel Ethernet/LAN Digital-I/O

Benefits of the RedLab/MCC E-DIO24 with 3x 8 bit Digital-I/O Ports

• Low-cost 24-channel Ethernet digital-I/O box.
• Easy to use.
• Also available as bundle "RedPack" with software ProfiLab-Expert.

MCC E-DIO24 (RedLab E-DIO24) 24-Channel Ethernet/LAN Digital-I/O

The MCC E-DIO24 or RedLab E-DIO24 (6069-410-052) is a 24-channel Ethernet digital-I/O device ideal for network-based applications and remote monitoring and control with 24 high-drive channels capable of driving relays. One counter channel is included. The module is functionally equivalent to RedLab/USB-1024 series devices, making application migration easy.

The MCC E-DIO24 (RedLab E-DIO24) has a built-in high-speed Ethernet communication port. Users can remotely access and configure the device with software over the internet. The module has 24 digital-I/O lines configured as three 8-bit ports. Each bit is individually configurable for input or output. Users can enable a digital bit configured for output to change state when a host connection is established or broken. Data can be transferred at rates up to 5 kS/s when the device and host are connected by Ethernet to the same local network. Typical throughput is system-dependent. All DIO lines are pulled high by default to 5 V through 47 kΩ resistors through three onboard jumpers. Each jumper configures one 8-bit digital port, and can easily be changed to pull-down. The 32 bit event counter pin counts TTL pulses, and accepts frequency inputs up to 10 MHz. Users access the counter using a pin shared with digital-I/O. The module requires 5 VDC power to operate.

• 24-channel digital-I/O.
• ±24 mA drive capability.
• Digital output alarm.
• One 32 bit event counter (shared with a DIO pin).
• Remote network configuration.
• DIN-rail compatible (optinal accessory).
• External power supply included.
• For production reasons from 2022 RedLab modules are now MCC USB modules in blue housing - otherwise completely identical and fully compatible!