RedLab E-1608 Ethernet/LAN Mini DAQ System
Benefits of the 16 bit Multifunction Ethernet DAQ Device RedLab E-1608
- Your Complete, Low-cost Ethernet DAQ System.
- Extremely Compact, Fits into a Vest Pocket.
- Also Available as Bundle "RedPack" with Software ProfiLab-Expert.
RedLab E-1608 Ethernet/LAN Mini DAQ System
For production reasons from autumn/winter 2022 in blue housing - otherwise completely identical!
The Ethernet-based RedLab E-1608 is a low-cost, high-speed, multifunction I/O DAQ device that measures eight analog channels at 250 kS/s aggregate with 16 bit resolution. This device also offers two analog outputs, eight digital-I/O channels, and one counter input.
The RedLab E-1608 has a built-in 10/100 Base-T auto-negotiation, high-speed communication port. The networking protocols are TCP/IP and UDP.
Once connected to the network, the device can be remotely accessed and configured through software from anywhere on the network. Only one user at a time can access the RedLab E-1608.
The RedLab E-1608 provides 16 bit analog inputs that are software-selectable as 8 single-ended or 4 differential inputs. The device supports input ranges of ±10 V, ±5 V, ±2 V, and ±1 V that are software-selectable per channel.
The RedLab E-1608 has two 16 bit, software-paced analog outputs that can be updated at a rate of 500 S/s. The output range is fixed at ±10 V.
The RedLab E-1608 has an external digital trigger input. The trigger mode is software-selectable for edge- or level-sensitive mode. You can configure edge-sensitive mode for either rising or falling edge. In level-sensitive mode, you can configure for either high or low level. The default setting at power up is edge-sensitive, rising edge.
Eight bidirectional digital-I/O bits are individually-configurable for input or output. The digital-I/O terminals can detect the state of any TTL-level input. You can configure for pull-up (+5 V) or pull-down (0 V) with an onboard jumper.
One 32 bit event counter can count TTL pulses. The counter accept inputs of up to 10 MHz.
The RedLab E-1608 has one external clock input and one clock output for analog inputs.
RedLab E-1608 devices are factory-calibrated. Specifications are guaranteed for one year. For calibration beyond one year, return the device to the factory for recalibration.
- 16 bit high-speed Ethernet device.
- Sample rates up to 250 kS/s.
- 8 single-ended/4 differential analog inputs.
- Input ranges ±10 V, ±5 V, ±2 V, ±1 V.
- Two 16 bit analog outputs. Update rate 500 S/s. Output range fixed at ±10 V.
- Eight individually-configurable digital-I/O.
- One 32 bit counter input.
- Includes a built-in 10/100 Base-T auto-negotiation, high-speed communication port.
- Uses TCP/IP and UDP for network communication.
- Screw-terminal connectors.
- option "-modul": Module only or
- option "-redpack": As bundle "RedPack" with the software ▸ProfiLab-Expert.
Included: RedLab module, Cat6 LAN cable, power supply, basic-software (download). Bundle "RedPack" with additional software ProfiLab-Expert.
Basic-Software:
- TracerDAQ (strip chart recorder and data logger).
- Universal Library (programming language support for Windows).
- Universal Library for Android.
- InstaCAL utility (for easy installation, calibration and test).
- Driver for LabVIEW.
- MATLAB Data Acquisition Toolbox supports InstaCal version from 5.89 (analog inputs and outputs (no streaming) are supported. Digital inputs/outputs as well as triggered acquisition not supported).
- Linux drivers.
Support for Visual Studio/Visual Studio .NET, examples for Visual C++, Visual C#, Visual Basic, and Visual Basic .NET.
Supported operating systems: Windows 10/8/7/Vista/XP, 32 and 64 bit.
Optional: ▸TracerDAQ Pro, ▸DAQami, ▸ProfiLab-Expert.
Related Products
Customers also bought