PeakTech P2755 Installation Safety Tester According to VDE 0100
Benefits of the P2755 Combination Meter for Testing Electrical Installations
- For testing electrical installations according to VDE 0100.
- TFT color display with backlight.
- USB, Bluetooth; internal SC memory card fordata recording.
PeakTech P2755 Installation Safety Tester According to VDE 0100
This innovative combination meter for testing electrical installations according to VDE 0100 convinces by its technical performance in the high-end range. With the large 9,8 cm/3.5" TFT color display all important safety checks as the RCD-, Voltage-, Loop-, Low-Ohm, Earth resistance and Insulation tests for annual safety-checks and newly installed systems can safely be carried out by the responsible electrical engineer.
The required measuring values can be stored with an App (iOS/Android) via Bluetooth on the mobile phone, saved to an SD card or, when work is completed, from the internal data memory via USB connection to a PC. Of course, the device is already equipped with an extensive range of accessories, all required test leads and any necessary software CD. An App for mobile phones can be downloaded additonally.
The built-in help function can display each measurement function with a connection-sketch, how a test must be carried out. Trough this and the graphical user interface, the device is easy to handle and applicable for all qualified electric personnel, technicians and engineers. To ensure a daily use, this device is powered by standard rechargeable Ni-Mh batteries, which can be loaded built-in the device. Additional charged batteries can be carried with the user to always ensure the applicability or to extend the already high average operating time of 15 hours even during longer missions. Also this device can be recharged from the mains or by a 12 V car adapter.
During use, this high quality unit is protected by its IP 65 protection rating against dust, jets of water on all sides and can be transported in the included carrying case safely. During the measurement process it can also safely be held comfortable with a carrying strap.
- 8.9 cm (3.5") TFT color display with backlight.
- For measurements according to DIN VDE0100/0413, EN61557-6, EN61008, EN61009 and IEC60364.
- Bluetooth interface for data transfer to a smart phone via Android or iOS App.
- USB interface for evaluation on PC.
- Internal memory and SD card for data recording.
- Safety: EN61010-1 ; CAT III 600 V, TÜV/GS.
Model Overview
| Specifications: | |
| Display | 8.9 cm/3.5" TFT Display; 320 x 240 Pixel |
| Interface | USB, Bluetooth, SD-Card |
| Test Standards | VDE0100/0413, EN61557-6, EN61008, EN61009 and IEC60364 |
| Measurement ranges: | |
| Functions | RCD-Test, Loop/Pfc, V, Low Ohm, RE, Insulation |
| L-PE | 0.23...999 O; ±5% + 6 Digits |
| L-N | 0.23...999 O ±4% + 4 Digits |
| RCD Current Multiplier | x½ ; x1 ; x2 ; x5 ; ±1% + 1 ms |
| RCD Current | 10 mA, 30 mA, 100 mA, 300 mA, 650 mA,1 A |
| RCD Trip-Time (max.) | ½ I?N: 1999 mS; I?N: 500 mS; 2xI?N: 150 mS; 5xI?N: 40 mS |
| Voltage measurement | 80...500 V AC/DC ; ±2% + 2 Digits |
| Frequency | 45...65 Hz ; ±2 Hz |
| Insulation-Test | 0.125 O...1000 MO at 125 V/250 V/500 V/1000 V; ±3% + 2 Digits |
| Low-Ohm Test | 0,000...2000 O; 0.001 O; ±1.5% + 3 Digits |
| Earth resistance | 0.00...2000 O; 0.001 O; ±2% + 30 Digits |
| General specifications: | |
| Safety | CAT III 600 V, IP65, SK II/Double Insulation, TÜV/GS |
| Operating Voltage | 8 x 1.2 V Ni-MH rechargeable battery |
| Battery Charger | 110...240 VAC, 50/60 Hz/12 VDC adaptor |
| Dimensions (WxHxD, mm) | 240 x 105 x 145 |
| Weight | 1560 g |
Included: P 2755, carrying case, Strap, Test leads, Test clips, Insulation-Probe, Universal charger, Earthingrod, Car charger, rechargeable Batteries, Manual and Software CD.
Information on product safety:
Manufacturer:
PeakTech Prüf- und Messtechnik GmbH, Gerstenstieg 4, 22926 Ahrensburg/DEU
www.peaktech.de
Related Products
