PeakTech P1115/1125 Digital Earth Resistance Tester and Milliohm Tester
EOL/obsolete, not available anymore
Benefits of the PeakTech P1115 Earth Resistance Tester and PeakTech P1125 Milliohm Tester
- Digital earth resistance tester 0...2000Ω, VDE 0413 or
- Digital milliohm tester, 3½ digit , 200/2000 mΩ/20/200/2000 Ω.
- Rugged design for field use in service and maintenance.
PeakTech P1115/P1125 Digital Earth Resistance Tester and Milliohm Tester
The rugged testers of the PeakTech Series P11x5 have a sealed housing and offer all the protection you need for outdoor use.
PeakTech P1115 Digital Earth Resistance Tester 0...2000Ω, VDE 0413
The PeakTech P1115 is a digital earth resistance tester for the testing of single earth electrodes such as lightning conductors and other small earthing systems according to VDE 0413. The resistance of conductors such as continuity and conduit coupling joints can also be measured. Two-terminal operation measurement, which reduces the accuracy, can also be done by shorting P and C terminals. The calibration of the instrument is performed with the included test leads. The test frequency of 820 Hz has been chosen to avoid stray currents at power frequencies and their harmonics and with a built-in filter to reject unwanted signals.
- 3½ digit LCD display (max.2000).
- Low BATT and overrange indication; data hold.
- Safety: EN 61010-1; CAT III 300 V.
PeakTech P1125 Digital Milliohm Tester, 3½ Digit , 200/2000 mΩ/20/200/2000 Ω
The PeakTech P1125 is a milliohm meter that allowes measurements of 100 µΩ up to 2000 Ω. The P1125 makes measurements by passing a constant current through the device and measure the voltage across it.
- Measuring the winding resistance of electic motors, generators, transformers, shunts, PCB tracks, switch and relay resistance.
- Bond testing in mines, aircrafts, railways, ships, domestic and industrial wiring installations.
- Measuring the ring main continuity testing in industrial and domestic wiring installations.
- Checking compression joints on overheads lines and testing and maintenance of switchboard/substation equipment on such items as fuses, joints, contacts and bonds.
- Over-Temperature and overvoltage protection.
- Auto-hold and Auto-off function.
- LED Indicators show if reading may be invalid Rp, Rc and Temperature.
- Safety: EN 61010-1; CAT IV 20 V.
Model Overview
| Model | P1115 | P1125 | |
| Measurement | Measurement down 0.01 Ω; earth ranges 20, 200, 2000 Ω ±2% + 2 digits; test current 2 mARMS; voltage range 0...200 VAC, 50/60 Hz ±3% + 2 digits; resistance display: Indicates if resistance of auxiliary spikes resistance is within range | Measuring range 0...200 mΩ in steps of 100 µΩ/0...2000 mΩ: 1 mΩ/0...20 Ω: 10 mΩ/0...200 Ω: 100 mΩ/0...2000 Ω: 1 Ω; Accuracy ±0.5% of reading ±2 digits over the operating temperature range -15...+55°C (with supplied test leads); test current 1 mA (2000 Ω range), 10 mA (20/200 Ω range), 100 mA (200/2000 mΩ range) | |
| Power supply | 8x 1.5 V batteries (UM3, AA) | 8x 1.5 V batteries (UM3) | |
| Dimensions (mm) | 250 x 190 x 120; 1.5 kg | 250 x 180 x 200; 1.35 kg | |
| Accessories | Test leads red 15 m, yellow 10 m, green 5 m, earth spikes, batteries, manual | Test cable, batteries, manual |
Included: P 1115 or 1125 and accessories (see table).
