Micsig RCP Series Rogowski AC Current Probes
![Micsig RCP series rogowski AC current probes](https://www.meilhaus.de/cosmoshop/default/pix/a/n/micsig-rcp300-xs.jpg)
starting €
665,21
including VAT
free shipping (Germany)
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Files/Downloads
Micsig RCP Series Rogowski AC Current Probes
- Up to 30 MHz bandwidth.
- Max. 600 AAC current measurement range.
- 1% typical accuracy.
- 1.6 mm coil crosscross-section diameter.
- Standard BNC interface.
Model Overview
Model | RCP300-XS | RCP600-XS | ▸RCP500 |
Bandwidth | 10 Hz...30 MHz | 10 Hz...30 MHz | 15 Hz...300 kHz (-3 dB) |
Measurement range (AC) | 200 mApk...300 Apk | 200 mApk...600 Apk | 200 mApk...500 Apk |
Output sensitivity | 20 mV/A (50X) | 10 mV/A (100X) | 10 mV/A |
Output noise | <18 mVPP | <12 mVPP | <2 mVRMS |
Accuracy (typ.) | 1% | 1% | 1% |
Offset voltage | <±1 mV | <±1 mV | <±1 mV |
Max. voltage/peak coil isolation voltage | AC 2 kVRMS (1 min, 50 Hz/60 Hz, Rogowski coil part only) | AC 2 kVRMS (1 min, 50 Hz/60 Hz, Rogowski coil part only) | AC 10 kVRMS (1 min, 50Hz/60Hz, Rogowski coil part only) |
Effect of conductor position/conductor positional accuracy | Within ±1% (deviation from center) | Within ±1% (deviation from center) | Within ±1% (deviation from the center) |
More specs | Peak di/dt: 20 kA/µs; Droop: 9%/ms; Interface: 1 MΩ BNC | Peak di/dt: 40kA/µs; Droop: 6%/ms; Interface: 1 MΩ BNC | Phase accuracy: ≤0.8° (45...66 Hz); Influence of external magnetic fields: 1.5% f.s. or below (400 A/m, 50 Hz/60 Hz) |
Power supply | 12 VDC | 12 VDC | PA05 adaptor (USB cable) |
Dimensions | Coil cross-section diameter 1.6 mm; coil inner diameter 25 mm (customizable); coil circumference 80 mm (customizable); wire length (integrator to Rogowski coil) 1.5 m (customizable) | Coil cross-section diameter 1.6 mm; coil inner diameter 25 mm (customizable); coil circumference 80 mm (customizable); wire length (integrator to Rogowski coil) 1.5 m (customizable) | Conductor under test diameter ≤50 mm; coil to integrator cable length 2 m (customizable) |
Working temperature | Base unit 0...+55°C, coil -20...+125°C | Base unit 0...+55°C, coil -20...+125°C | -20...+70°C |
Related Products
Customers also bought