ME-6100 Isolated 16bit Analog Output Board with FIFOs

Benefits of the ME-6100 Series High Precision PC D/A Boards with Full Opto-Isolation and FIFOs

• Reliable analog outputs in 16 bit precision with full galvanic isolation.
• Enhanced functions with FIFOs on channels 1 to 4.
• English and German user manuals.

ME-6100 Isolated 16bit Analog Output Board with FIFOs

These analog output boards offer high noise immunty and high precision with complete opto-isolation of all channels, and are suitable for industry and lab. The boards have individual high precision 16 bit D/A converters per channel and additional FIFOs on channels 1 - 4.

• Supported by the driver system ME-iDS for Windows 7 to 10.
• Isolated analog output/control PC-board
• Depending on model: 4, 8, or 16 voltage outputs.
• Range ±10 V (max. ±15 mA per channel).
• All channels opto-isolated, available as:
  • Full opto-isolation with no common ground ("p"). All individual channels opto-isolated from the PC and from each other.
  • Opto-isolated outputs with common ground ("i").
• Individual 16 bit/500 kHz high precision D/A converter per channel. Transparent output.
• Automatic adjustment, no potentiometers.
• 16 TTL digital I/O channels, organized as 2x 8 bit ports. Each port programmable as input or output.
• One 8 kByte FIFO each on channel 1 - 4 for extended operating modes (generation of waveforms): Continuous output or wrap-around/periodic output of data sets from the FIFO under timer control. Periodic signals up to 250 kHz (square signal).
• PC DAQ board for PCI or 3 U CompactPCI/PXI.

Model Overview

The models available in the shop are standard products. Other models are produced only, if ordered in higher numbers.
Note: The D/A rate of 500 kHz is the max. value of the D/A converter chip. The true rate depends on the system (see datasheet), except for the ME-6100/ME-6300 channels with FIFOs in the corresponding operating mode.

Meilhaus Electronic Original Product!