Keysight E36232A 1-Channel Autoranging DC Power Supply up to 200W
Benefits of the Keysight E36232A Autoranging DC Power Supplies
- 1-channel autoranging power supply up to 200 W.
- High accuracy, low ripple and noise.
- USB, Ethernet/LAN/LXI and optional GPIB interfaces.
Keysight E36232A 1-Channel Autoranging DC Power Supply up to 200 W
The Keysight E36232A single output power supply is intended for your bench applications that require power up to 200 W. Autoranging technology provides the highest current available at all output voltage. The DC output rating of teh device is 0...60 V and 0...10 A.
- Useable power 200 W.
- Autoranging more current at all voltage.
- Variable voltage slew rate to control inrush current.
- Low noise, DUT protection and precision measurements.
- 350 µVRMS noise.
- Over-voltage, over-current, over-temperature protection.
- Local 2–wire or remote 4-wire measurements.
- Low range current measurement.
- Fully programmable power supply.
- Interfaces: USB, Ethernet/LAN, LXI Class-C, digital-I/O and optional GPIB.
- Suported by BenchVue. BenchVue makes it simple to connect, control instruments, and automate test sequences.
- E3633A/E3634A code compatible.
- Advanced features:
Data logger.
Output LIST.
Sequence outputs.
Model Overview
| Model | ▸E36231A | ▸E36232A | ▸E36233A | ▸E36234A | ||
| Power output | 200 W | 200 W | 400 W | 400 W | ||
| Channel | 1 | 1 | 1 | 2 | 1 | 2 |
| DC output rating (0...40ºC) | 0...30 V | 0...60 V | 0...30 V | 0...30 V | 0...60 V | 0...60 V |
| 0...20 A | 0...10 A | 0...20 A | 0...20 A | 0...10 A | 0...10 A | |
| Output ripple and noise (20 Hz...20 MHz), normal mode voltage, VPP | <4.5 mVPP | <3.5 mVPP | <4.5 mVPP | <3.5 mVPP | ||
| Output ripple and noise (20 Hz...10 MHz), normal mode voltage, VRMS | <350 µVRMS | |||||
| Accuracy 12 months (23ºC ±5ºC); programming accuracy ±(% of output + offset) | ||||||
| Voltage | 0.03% +4 mV | 0.03% +8 mV | 0.03% +4 mV | 0.03% +8 mV | ||
| Current | 0.1% +6 mA | 0.1% +3 mA | 0.1% + 6 mA | 0.1% +3 mA | ||
| Low range current* | 0.25% +160 µA | 0.25% +80 µA | 0.25% +160 µA | 0.25% +80 µA | ||
| Typical Characteristic | ||||||
| Command processing time | <10 ms | |||||
| Up/down programming settling time to within 1% of total excursion | Up full load: 50 msec; up no load: 50 msec; down full load: 30 msec; down no load: 100 ms | |||||
| Features | ||||||
| Low range current | ✓ | ✓ | ✓ | ✓ | ||
| Data logging | ✓ | ✓ | ✓ | ✓ | ||
| Voltage slew rate | ✓ | ✓ | ✓ | ✓ | ||
| Output LIST | ✓ | ✓ | ✓ | ✓ | ||
| Digital-I/O port | ✓ | ✓ | ✓ | ✓ | ||
| Remote sensing | ✓ | ✓ | ✓ | ✓ | ||
| Outputs at front and rear | ✓ | ✓ | ✓ | ✓ | ||
| Auto series/parallel connections | - | - | ✓ | ✓ | ||
| Output sequencing | - | - | ✓ | ✓ | ||
| E3633A/E3634A code compatible | ✓ | ✓ | - | - | ||
| I/O interfaces | USB 2.0, Ethernet/LAN, LXI Class-C, optional GPIB | |||||
| Dimensions (mm, over all) | 145 x 216 x 389; approx. 5.8 kg | 145 x 216 x 389; approx. 5.8 kg | 145 x 216 x 405; approx. 7.0 kg | 145 x 216 x 389; approx. 6.9 kg | ||
* ≤100 mA for E36231A and E36233A, ≤50 mA for E36232A and E36234A.
Included: Keysight E 36232A, AC power cord, digital-I/O connector, rear output connector.
Software: Keysight I/O Library. Suported by BenchVue. BenchVue makes it simple to connect, control instruments, and automate test sequences.
Note: The recommended calibration interval for these devices is 12 months. Call or send an E-Mail for more information on calibration!
Agilent’s Electronic Measurement Group is now Keysight Technologies.
Related Products
