Drago DB6200 Series 3-Way Isolation Amplifier, Selectable I/O Ranges

Drago DB6200 Series 3-Way Isolation Amplifier, Selectable I/O Ranges
starting 304,64
including VAT free shipping (Germany)
min Quantity
1 piece
Unit price
base price
Variants
technical Question?
recommend by email
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Accessories
Files/Downloads

Benefits of the DB6200 Measurement Amplifiers with Galvanic Isolation

  • Flexible: 11 input/output ranges selectable.
  • Compact DIN-rail mountable modules.
  • Reliable galvanic isolation.

Drago DB6200 Series 3-Way Isolation Amplifier, Selectable I/O Ranges

The 3-way isolation amplifier is used for electrical isolation and conversion of bipolar and unipolar process signals. Input and output range can be set by using DIP switch. The zero/span adjustment on the front allows a fine-tuning of the measurement signal and the recalibration after a range selection. The 3-way isolation guarantees reliable decoupling of the sensor circuit from the processing circuit and prevents linked measurement circuits from influencing each other. The protective separation with high isolation level provides protection for personnel and downstream devices against impermissibly high voltage. The input signal is modulated and then electrically decoupled using a transformer. The isolated signal is then made available at the output, demodulated, filtered and amplified.

  • 3-way isolation amplifier.
  • 11 input and output ranges available (see table below). The table shows the default factory setting for your order. The ranges can be re-configured at any time with DIP switches.
  • Working voltage (basic insulation): 1000 VAC/DC for overvoltage category II and contamination class 2 acc. to EN 61010 part 1.
  • Test voltage 4 kV.
  • Power supply 20...253 VAC/DC, AC 48...62 Hz, approx. 2 VA, DC approx. 1.0 W.
  • Construction 12.5 mm housing, protection type: IP20.
  • Pluggable screw connection solid/stranded 0.2...2.5 mm², AWG 24...12 tightening torque 0.5...0.6 Nm. Weigth approx. 100 g.

Model Overview

(default factory setting only - can be re-configured at any time)

ModelInputOutput
CodeRangeCodeRange
DB6200AG-- (AG only)no presetting- (AG only)no presetting
00±10 V0±10 V
010...10 V010...10 V
022...10 V022...10 V
03±5 V03±5 V
040...5 V040...5 V
051...5 V051...5 V
06±20 mA06±20 mA
070...20 mA070...20 mA
084...20 mA084...20 mA
09±10 mA09±10 mA
100...10 mA100...10 mA
112...10 mA112...10 mA

Select AG only for configurable versions without factory presetting (only available for both channels at the same time!), or a combination of factory preset input/output ranges (default factory setting - can be re-configured at any time).

Other combinations on request!

Included: Module, instructions for use.