Ceyear Electromechanical RF Switches, Millimeter-Wave WG Switches
Description
Files/Downloads
Ceyear Electromechanical RF Switches and Millimeter-Wave WG Switches
- An RF switch or microwave switch is a device to route high frequency signals through transmission paths.
- RF and microwave switches are used extensively in microwave test systems for signal routing between instruments and devices under test (DUT).
- Incorporating a switch into a switch matrix system enables you to route signals from multiple instruments to single or multiple DUTs.
- This allows multiple tests to be performed with the same setup, eliminating the need for frequent connects and disconnects.
- The entire testing process can be automated, increasing the throughput in high-volume production environments.
- Wide frequency range from DC to 67 GHz, exceptional insertion loss, low VSWR, excellent isolation.
- High reliability, operating life of million cycles.
- Low power loss, various control mode.
- Available in various types including SPDT, DPDT, SPNT, 2P3T:
Single pole, double throw (SPDT or 1:2) switches route signals from one input to two output paths.
Multiport switches or single pole, multiple throw (SPnT) switches allow routing of a single input to multiple (three or more) output paths.
Transfer switches or double pole, double throw (DPDT) switches can serve various purposes.
Model Overview
| FET series | ||||||||
| Model | Type | Frequency range | Insertion loss (max.) | Isolation (typ.) | VSWR (on/off state) | P-1 dB (typ. >500 MHz) | Switching time (typ.) | Connector type |
| Ceyear-70103 | SPDT (reflective) | 300 kHz...6 GHz | 3 dB | 40 dB | max. 2.0 | 25 dBm | 0.1 µs | 3.5 mm(f) |
| 6 GHz...20 GHz | 4.5 dB | 30 dB | ||||||
| Ceyear-70104 | SPDT (absorptive) | 300 kHz...6 GHz | 4.8 dB | 90 dB | max. 1.6/1.4 | 27 dBm | 20 µs | 3.5 mm(f) |
| Ceyear-70105 | SPDT (absorptive) | 300 kHz...6 GHz | 5.5 dB | 90 dB | max. 2.0/1.6 | 25 dBm | 20 µs | 3.5 mm(f) |
| 6 GHz...20 GHz | 9 dB | 75 dB | ||||||
| PIN series | ||||||||
| Ceyear-80106 | SP4T (reflective) | 10 MHz...10 GHz | 2.8 dB | 30 dB | typ. 1.7/- | - | - | 3.5 mm(f) |
| 10 GHz...20 GHz | 3.5 dB | 30 dB | typ. 2/- | |||||
| Ceyear-80109 | SP16T (reflective) | 10 MHz...20 GHz | 7 dB | 30 dB | typ. 2/- | - | - | 3.5 mm(f) |
| Ceyear-80107 | SP4T (absorptive) | 10 MHz...20 GHz | 4.5 dB | 110 dB | typ. 1.9/1.7 | - | - | 3.5 mm(f) |
| 10 GHz...20 GHz | 4.5 dB | 110 dB | typ. 2.2/1.7 | |||||
| Ceyear-80108 | SP4T (absorptive) | 10 MHz...10 GHz | 4.5 dB | 110 dB | typ. 1.9/1.7 | - | - | 2.4 mm(f) |
| 10 GHz...20 GHz | 4.5 dB | 110 dB | typ. 2.2/1.7 | |||||
| 20 GHz...40 GHz | 8 dB | 90 dB | typ. 2.5/2.2 | |||||
| Ceyear-80110 | SP3T (absorptive) | 1 MHz...18 GHz | 6 dB | 50 dB | typ. 1.8/- | - | - | 3.5 mm(f) |
| Millimeter-wave WG switches | ||||||||
| Model | Frequency range | Connector type | Flange standard (UG) | Switching speed (max.) | Insertion loss (max.) | SWR (max.) | Isolation (max.) | Weight (max.) |
| Ceyear-82101 | 50...75 GHz | WR15 | UG-385/U-M | 100 ms | 0.8 dB | 1.3 | 30 dB | 842 ±50 g |
| Ceyear-82102 | 75...110 GHz | WR10 | UG-387/U-M | 100 ms | 1 dB | 1.3 | 30 dB | 842 ±50 g |
| Ceyear-82103 | 40...60 GHz | WR19 | UG-383/U-M | 100 ms | 0.6 dB | 1.3 | 30 dB | - |
| Ceyear-82104 | 26.5...40 GHz | WR28 | UG-599/U | 100 ms | 0.6 dB | 1.3 | 30 dB | - |
| Ceyear-JH-BJ140/01-001S | 12...17 GHz | WR62 | UBR140 | 40 ms | 0.1 dB | 1.1 | 60 dB | 220 ±15 g |
| Ceyear-JH-BJ220-003S | 18...26.5 GHz | WR42 | UBR220 | 50 ms | 0.2 dB | 1.2 | 60 dB | 220 ±15 g |
| Ceyear-JH-BJ320-002S | 18...26.5 GHz | WR28 | UG-599/U | 50 ms | 0.2 dB | 1.2 | 60 dB | 220 ±15 g |
Information on product safety:
Manufacturer:
Ceyear Technologies Co., Ltd, No.98, Xiang Jiang Road, Huangdao District, Qingdao/CHN
www.ceyear.com
Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meihaus.com
