WaveNet-Ex - WiFi MIMO Access Point and Mesh Router for Hazardous Areas
Benefits of the WaveNet-Ex WiFi AP and Mesh Router for ATEX Zone 1
- WiFi access point, client, repeater, router, and mesh point.
- Heavy duty aluminum or stainless steel IP68 enclosure.
- 2 or 3 intrinsically safe RF outputs (support any type of antenna).
Acksys WaveNet-Ex - WiFi MIMO Access Point and Mesh Router for Hazardous Areas
The Acksys WaveNet-Ex is an all-in-one WiFi device (access point, client, repeater, router, and mesh point) designed for industrial applications in zone 1 rated explosive areas. Its aluminium enclosure is perfectly suited for chemical industries, refineries, electric stations, very dusty locations as well as those where sparks and electric arcs occur. It can also be used in the sea in its stainless steel version and thus defy the rusting effects of salt water. WaveNet-Ex is ideal for tele-operation of heavy machinery from a remote control station, collision avoidance, localization of people and goods and other services as evacuation signaling systems, VoIP wireless phones, mobile data download (smartphones, tablets etc.), mobile and fixed IP video and others. WaveNet-Ex relies on the multi-streams MIMO technology that contributes to an expanded coverage, higher data throughput and increased radio link reliability to ensure seamless communication. The three antenna connectors protected by an intrinsic barrier allow the use of non-ATEX antennas for a reduced installation cost and an increased flexibility.
- WiFi access point, client, repeater, router, and mesh point (mesh mode is supported on all models equipped with the 11n radio).
- ATEX/IECEX certification: 2G Ex db IIC T5-T4 Gb, 2D Ex tb IIIC T110°C/T140°C Db, M2 Ex db I Mb (SWS only), Zone 1, 2, 21 and 22.
- Heavy duty aluminum or stainless steel IP68 enclosure.
- 2 or 3 intrinsically safe RF outputs (support any type of antenna).
- Ethernet interface: 1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, auto MDI/MDIX cross-over, RJ45.
- WiFi interfaces: 802.11n/802.11ac/, MIMO 2T2R, 2.4/5 GHz (+ 802.11ac), ANI (Adaptive Noise Immunity).
- DC power supply input (+18...+60 VDC) or PoE or PPoE (Passive Power over Ethernet).
Model Overview
| Model | Models 1033 | Models 1133 | Models 1230 |
| WiFi interfaces | 802.11n, MIMO 2T2R, 2.4/5 GHz, ANI | 802.11ac, MIMO 2T2R, 2.4/5 GHz, ANI | 802.11n, MIMO 2T2R, 2.4/5 GHz + 802.11ac, 2.4/5 GHz, ANI |
| Wifi radio data rate | up to 300 Mbps | up to 867 Mbps | up to 300 Mbps (802.11n) + up to 433 Mbps (802.11ac) |
| Operating frequencies | 2.4...5.8 GHz | ||
| Ethernet | 1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, auto MDI/MDIX cross-over, RJ45 | ||
| Output power | 2.4 GHz: Up to 23.5 dBm (aggregate) 5 GHz: Up to 21 dBm (aggregate) ±2 dB | 2.4 GHz: Up to 20.8 dBm (aggregate) 5 GHz: Up to 19.8 dBm (aggregate) ±2 dB | 2.4 GHz: Up to 23.5 dBm (aggregate) 5 GHz: Up to 21 dBm (aggregate) ±2 dB (802.11n) 2.4 GHz: Up to 19 dBm 5 GHz: Up to 18 dBm ±2 dB (802.11ac) |
| Power supply | +18...+60 VDC or PoE or PPoE (Passive Power over Ethernet) | ||
| Housing | |||
| Aluminum, 3/4" npt | SWAA1033-421X0 | SWAA1133-421X0 | SWAA1230-421X0 |
| Aluminum, M25 x 1.5 | SWAA1033-440X0 | SWAA1133-440X0 | SWAA1230-440X0 |
| Stainless steel, 3/4" npt | SWSA1033-42EM0 | SWSA1133-42EM0 | SWSA1230-42EM0 |
| Dimensions (mm) | Enclosure weight (aluminum models): 2.6 kg Aluminum enclosure: 180 (+ 2 couplers) x 180 (+1 coupler) x 90 Stainless steel enclosure: 181 (+ 2 couplers) x 196 (+1 coupler) x 90 One metric coupler: 59/one npt coupler: 70 | ||
| Environmental | IP68; operating temperature: -40...+60°C , storage -40...+80°C, humidity 5...95% (non-condensing) | ||
Information on product safety:
Manufacturer:
ACKSYS Communications & Systems, ZA du Val Joyeux, 10 rue des Entrepreneurs, 78450 Villepreux/FRA
www.acksys.com
