Tekbox TBRX101 Loop Antennas for MIL-STD-461G RE101 Testing
Tekbox TBRX101 Loop Antennas for MIL-STD-461G RE101 Testing
Tekbox TBRE101 Passive Receiving Loop Antenna
The Tekbox TBRE101 is a passive receiving loop antenna used in MIL-STD-461G RE101 testing to measure radiated emissions from electronic equipment and subsystems, including electrical cable interfaces for defense applications. The TBRE101 is used to measure low frequency magnetic field emissions 7 cm from all sides of the DUT.
Tekbox TBRS101 Loop Antenna
The Tekbox TBRS101 loop antenna set consists of the TBRS101-TX radiating loop, TBRS101-RX field monitoring loop and ▸TBCCP1-2K70.
The TBRS101-TX radiating loop is used to generate the low frequency magnetic field emissions. The distance between the winding and EUT is 5 cm. This is accomplished when the front edge of the the radiating loop comes into contact with the EUT faces during testing.
The TBRS101-RX field monitoring loop receives magnetic field radiation normal to the containing plane 5 cm from the TBRS101-TX radiating loop winding and produces a voltage signal proportional to the intensity of the B-field/H-field radiation at the loop's output port.
Model Overview
Model | TBRE101 | TBRS101-TX | TBRS101-RX |
Type | Receiving loop antenna | Radiating loop antenna | Passive monitoring loop antenna |
Frequency range | 30 Hz...100 kHz (usable frequency range 10 Hz...1 MHz) | 30 Hz...100 kHz | 30 Hz...100 kHz |
Standards | MIL-STD-461G/RE101 | MIL-STD-461G/RS101 | MIL-STD-461G/RS101 |
Loop construction | 36 turns of 7 strand 41 AWG Litz wire; diameter 13.3 cm | 20 turns of 12 AWG Gauge 2mm copper wire; diameter: 12 cm | 51 turns of 7 strand 41 AWG Litz wire; diameter: 4.1 cm |
DC resistance of the loop coil | 10 Ω (nominal) | 50 mΩ (nominal) | 4.1 Ω (nominal) |
Self inductance of the loop coil | 385 µH | 90 µH | 180 µH |
Output connector | N-female, 50Ω | Male banana plugs | N-female, 50Ω |
Antenna conversion factor | Within ±3 dB compared to the theoretical validation factor for standard RE101 loop in MIL-STD-461G | - | Within ±3 dB compared to the theoretical validation factor for standard RS101 field monitoring loop in MIL-STD-461G |
Dimensions (mm, LxWxH) | 106 x 152 x 191; 0.5 kg | 82 x 152 x 152 (No mounting pole)/380 x 152 x 152 (mounting pole); 0.5 kg) | 437 x 542 x 792; 0.1 kg |
Optional accessories, sets | TBRS101-TX: Radiating loop for generating magnetic fields in the range of 30 Hz...100 kHz; TBCCP1-2K70: Coaxial RF current monitoring probe for measuring the injected current into the radiating loop; TBMR-110M: 1 Hz...110 MHz measurement receiver, CISPR 16 and MIL-STD-461 | TBRS101-SET: Set of TBRS101-TX, TBCCP1-2K70, and accessories |
Frequently Asked Questions:
Question: What does MIL-STD-461G RS10 mean?
Answer: The MIL-STD-461G RS101 test determines the susceptibility of equipment installed in close proximity to large radiated magnetic fields, and their ability to withstand them in the frequency range 30 Hz...100 kHz.
Information on product safety:
Manufacturer:
TekBox Digital Solutions Vietnam Co. Ltd., Saigon Hi-Tech Park, Factory 4, 4F, Lot I-3B-1, N6 Street, Thu Duc City, 700 000 Ho Chi Minh City/VNM
www.tekbox.com
Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meilhaus.com
Last seen