Siglent SHS800X/SHS1000X Series Handheld Oscilloscopes and Multimeters
Benefits of the SHS800X and SHS1000X Series Handheld Multifunctional Digital Oscilloscope
- Rugged handheld scope, DMM, and data logger in one.
- Serial bus triggering and decoding for I²C, SPI, UART, CAN, and LIN incl.
- SHS1000X series: Isolated channels.
Siglent SHS800X/SHS1000X Series Handheld Oscilloscopes and Multimeters
Models Siglent SHS810X, SHS820X, SHS1102X, SHS1202X Scope and DMM Combination Instruments
The Siglent Series SHS800X and SHS1000X are multifunctional handheld instruments with a combination of oscilloscope, digital multimeter and data logger. With their rugged IP51-housing, a variety of interesting functions and USB interface they are a good soultion for applications such as maintenance, repair, industrial applications and many more.
- 200 MHz or 100 MHz bandwidth.
- Sample rate 1 GS/s (single-channel), 500 MS/s (two-channels).
- Waveform capture rates up to 100,000 wfm/s (normal mode) or 400,000 wfm/s (sequence mode).
- Intelligent digital trigger system.
- Serial bus triggering and decoding (standard) for I²C, SPI, UART, CAN, and LIN protocols.
- Video trigger/HDTV.
- Record length up to 12 Mpts.
- Segmented acquisition (sequence) mode divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user.
- History waveform record (history) function (maximum recorded waveform length is 80,000 frames).
- 1 Mpts FFT. Support peaks and markers.
- Math functions, automatic measurement function for 38 parameters, measurement statistics.
- 6000 counts digital multimeter, support DCV, ACV, DCI, ACI, resistance, diode, capacitance, continuity test. True RMS AC voltage/current measurement.
- Isolated USB Host and Device interfaces, supports SCPI remote control commands.
- IP51; compliance with UL61010-1, UL61010-2-030, UL61010-2-033.
Model Overview
| Model | SHS810X | SHS820X | SHS1102X | SHS1202X |
| Channels | 2 analog oscilloscope channels, 1 multimeter channel | 2 analog oscilloscope channels, 1 multimeter channel; isolated input; CMRR >100 dB DC/>50 dB to AC 1 MHz | ||
| Bandwidth | 100 MHz | 200 MHz | 100 MHz | 200 MHz |
| Sample rate (max.) | Two-channel share a single 1 GS/s ADC. When two channels are enabled, each channel has a maximum sample rate of 500 MS/s. When a single channel is active, that channel has a sample rate of 1 GS/s; vertical resolution 8 bit | |||
| Memory depth (max.) | 6 Mpts per channel (dual-channel mode); 12 Mpts per channel (single channel mode) | |||
| Waveform capture rate (max.) | 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) | |||
| Trigger types | Edge, slope, pulse width, window, runt, interval, dropout, pattern, video | |||
| Serial trigger and decoder | I²C, SPI, UART, CAN, LIN | |||
| Data logger/recorder | Sample logger: Max. sample rate 25 kS/s, min. sample rate 1 S/s Measurement logger: Max. interval 10 min, min. interval 0.1 s. Max. items of logging: 4 | |||
| Max. input voltage - scope | CAT II 300 VRMS between BNC signal and protecting earth CAT II 30 VRMS between BNC GND and protecting earth CAT II 300 VRMS between BNC Signal and BNC GND | CAT III 600 VRMS, CAT II 1000 VRMS between BNC signal and protecting earth CAT III 600 VRMS, CAT II 1000 VRMS between BNC GND and protecting earth CAT III 300 VRMS between BNC signal and BNC GND | ||
| Max input voltage - meter | CAT III 300 VRMS, CAT II 600 VRMS | CAT III 600 VRMS, CAT II 1000 VRMS | ||
| Shortcut buttons | 3 one-button shortcuts for oscilloscope, multimeter and recorder functions 8 one-button shortcuts for run/stop, auto setup, default, measure, cursors, display/persist, clear sweep and print. More function shortcuts available when combined with the shift button | |||
| Interfaces | USB Host, USB Device (MicroUSB) | |||
| Display | 5.6"/14,2 cm TFT-LCD (640x480); 256-level intensity grading and color temperature display modes | |||
| Dimensions (mm) | 276 x 168 x 68; 1.75 kg | |||
| IP rating | IP51 | |||
| Probe type | PP510 | PP215 | PB925 | |
Included: Handheld device SHS 810X, 820X, 1102X, or 1202X, USB cable, quick start guide, 2x passive probes, certification, power adaptor, battery, SCD600MA current measurement adaptor, SCD10A current measurement adaptor, carrying bag.
Information on product safety:
Manufacturer:
SIGLENT Technologies CO., LTD., Blog No.4 & No.5, Antongda Industrial Zone, 3rd Liuxian Road, Bao’an District, Shenzhen, 518101/CHN
www.siglent.com
(EU branch Germany)
Customers also bought
