Siglent SDS1000X HD Series 12bit Oscilloscopes up to 200MHz

New
starting 1.141,21
including VAT free shipping (Germany)
min Quantity
1 piece
Unit price
base price
Variants
technical Question?
recommend by email
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Accessories
Files/Downloads

Benefits of the SDS1000X HD Series 2/4 Channel 2 GS/s DSOs and MSOs

  • High 12-bit resolution, high accuracy and low noise floor 70 µVRMS.
  • 2 or 4 analog channels, 16 digital channels (MSO), ARB generator output option.
  • 10.1"/25.7 cm touch display, USB and LAN/Ethernet interfaces.

Siglent SDS1000X HD Series 12 bit Oscilloscopes up to 200 MHz

Siglent SDS1102X HD, SDS1104X HD, SDS1202X HD, SDS1204X HD High Resolution Oscilloscopes

The Siglent SDS1000X HD series are 12-bit high-resolution digital oscilloscopes. Compared to the SDS800X HD series they offer a 10.1"/25.7 cm instead of 7"/17.8 cm capacitive touch display, and a slightly extended range of functions. The SDS1000X HD series oscilloscopes have 2 or 4 analog channels and 16 digital channels (MSO option - software licence included, additional logic probes required).

  • 2 or 4 analog channels, 16 additional digital/logic channels (MSO: Software licence included, additional logic probes required).
  • Analog channel bandwidth up to 100, or 200 MHz; real-time sampling rate up to 2 GS/s.
  • Vertical resolution 12 bit.
  • Low noise floor, as low as 70 µVRMS at full 200 MHz bandwidth.
  • SPO technology:
    • Waveform capture rate up to 500,000 wfm/s (sequence mode), 120,000 wfm/s (normal mode).
    • Supports 256 levels of waveform brightness and color temperature display.
    • Memory depth up to 100 Mpts.
  • Digital trigger with high sensitivity and small trigger jitter.
  • Serial bus trigger and decode, supported protocols include standard I2C, SPI, UART, CAN, LIN, CAN-FD (decoding only), FlexRay (decoding only).
  • Segmented acquisition (sequence) mode: the maximum storage depth can be divided into 80,000 equal segments, according to the trigger conditions set by the user; very small dead time.
  • History mode can record up to 80,000 frames of waveforms.
  • Automatic and advanced measurement functions: Measurement statistics, gating measurement, math measurement, history measurement, ref. measurement, histogram and trend chart statistics, 4 independent waveform operations, 2M point FFT, more than 20 kinds of commonly used time domain operations.
  • Multiple advanced data analysis and processing capabilities: search and navigation, high-speed mask test, Bode plot, power analysis (option), counter, etc.
  • Optional 25 MHz arbitrary waveform generator.
  • 10.1"/25.7 cm capacitive touch display.
  • USB 2.0 host and device, LAN/Ethernet.
  • Supports external mouse and keyboard operation; built-in WebServer support, control instrument via web page; supports NTP (Network Time Protocol). Supports rich SCPI remote control commands.

Model Overview

ModelSDS1102X HDSDS1104X HDSDS1202X HDSDS1204X HD
Analog channels2 + EXT4 + EXT2 + EXT4 + EXT
Bandwidth100 MHz200 MHz
Resolution12 bit12 bit
Sample rate2 GS/s2 GS/s
Memory depth100 Mpts/ch100 Mpts/ch
Waveform capture rate120,000 wfm/s (normal mode), 500,000 wfm/s (sequence mode)
Noise floor70 µVRMS at full 200 MHz bandwidth
TriggerEdge, slope, pulse width, window, runt, interval, timeout, dropout, pattern, video , qualified, nth edge, delay, setup/hold time, serial;
serial trigger and decode standard: I2C, SPI, UART, CAN, LIN, CAN FD (decoding only), FlexRay (decoding only)
Digital channels (MSO)16; max. 1 GS/s sampling rate, 10 Mpts/ch storage depth; MSO software licence included; additional logic probes required as optional accessories
Additional featuresBode plot; hardware-accelerated FFT up to 2 Mpts, 7-digits counter
Arbitrary waveform generatorOption; USB; single channel, maximum output frequency 25 MHz, sampling rate 125 MS/s, 14 bit, waveform length 16 kpts, isolated output
Display10.1"/25.7 cm capacitive touch display, resolution 1024*600
InterfacesUSB 2.0 host and device, 10M/100M LAN/Ethernet
Additional connectionsSBUS (Siglent logic analyzer interface), auxiliary outputs: TRIG OUT, PASS/FAIL

Included: Oscilloscope Siglent SDS 1072X HD, 1074X HD, 1102X HD, 1104X HD, 1202X HD, or 1204X HD, power cord, passive probes (1 per channel), USB data cable, quick guide, calibration certificate.

Available Options and Accessories

ModelDescription
SAG1021IUSB isolated arbitrary waveform generator hardware
SLA101616-channel logic analyzer hardware
SDS1000XHD-PAPower analysis option (software)
DF2001APhase calibration board

Model Overview - Siglent 12-bit Oscilloscopes

For a long time, 8-bit A/D converters were the standard in commercially available oscilloscopes. However, the trend is now clearly moving towards a higher resolution of 12 bit.
With the HD series, Siglent is now following this trend after the high-end A series SDS7000A also with the Performance/X series: advanced 12-bit technology at an attractive price.

Model▸SDS800X HD▸SDS1000X HD▸SDS2000X HD▸SDS3000X HD
Analog channels2, 42, 444
Bandwidth70, 100, 200 MHz100, 200 MHz100, 200, 350 MHz350, 500 MHz, 1 GHz
Resolution12 bit12 bit12 bit12 bit
Max. sample rate of series2 GS/s2 GS/s2 GS/s4 GS/s
Max. memory depth of series100 Mpts100 Mpts200 Mpts400 Mpts
Max. waveform capture rate of series, normal mode80,000 wfm/s120,000 wfm/s100,000 wfm/s200,000 wfm/s
Noise floor (at full bandwidth)70 µVRMS70 µVRMS70 µVRMS125 µVRMS
Serial trigger and decodeStandard: I2C, SPI, UART, CAN, LINStandard: I2C, SPI, UART, CAN, LIN, CAN FD (decode only), FlexRay (decode only)Standard: I2C, SPI, UART, CAN, LIN; optional: CAN FD, FleyRay, I2S, MIL-STD-1553B, SENT, Manchester (decode only)Standard: I2C, SPI, UART, CAN, LIN; optional: CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester (decode only), ARINC429
Digital channels (MSO option)16; max. 500 MS/s sampling rate, 10 Mpts/ch storage depth16; max. 1 GS/s sampling rate, 10 Mpts/ch storage depth16; max. 500 MS/s sampling rate, 50 Mpts/ch storage depth16; max. 1 GS/s sampling rate, 100 Mpts/ch storage depth
Additional featuresBode plot; hardware-accelerated FFT, 7-digits counter
Arbitrary waveform generatorOption; USB; single channel, max. output frequency 25 MHz, sampling rate 125 MS/s, 14 bit, waveform length 16 kptsOption; USB; single channel, max. output frequency 25 MHz, sampling rate 125 MS/s, 14 bit, waveform length 16 kptsSoftware option: Built-in, max. output frequency 25 MHz, sample rate 125 MS/s, 14 bit, waveform length 16 kptsOption; USB, single channel, max. output frequency 50 MHz, sampling rate 125 MS/s, 14 bit, waveform length 16 kpts
Display7"/17.8 cm capacitive touch display10.1"/25.7 cm capacitive touch display10.1"/25.7 cm capacitive touch display10.1"/25.7 cm capacitive touch display
InterfacesUSB 2.0 host and device, LAN/EthernetUSB 2.0 host and device, LAN/EthernetUSB 2.0 host and device, LAN/EthernetUSB 3.0 host and device, USB 2.0 host, LAN/Ethernet


Information on product safety:

Manufacturer:
SIGLENT Technologies CO., LTD., Blog No.4 & No.5, Antongda Industrial Zone, 3rd Liuxian Road, Bao’an District, Shenzhen, 518101/CHN
www.siglent.com
(EU branch Germany)

Customers also bought