Siglent PB/PP/SP Series Passive and Active Probes
Description
Files/Downloads
Siglent PB/PP/SP/SAP Series Passive and Active Probes
Available in these versions/with these technical specs:
| Model | Bandwidth | Attenuation ratio | Input impedance | Voltage |
| PB470 | 70 MHz | x1/x10 | 1 MΩ/10 MΩ | 300 V/600 V |
| PP510 | 100 MHz | x1/x10 | 1 MΩ/10 MΩ | 300 V/600 V |
| PP215 | 200 MHz | x1/x10 | 1 MΩ/10 MΩ | 300 V/600 V |
| PP430 - EOL/obsolete | 300 MHz | x1/x10 | 1 MΩ/10 MΩ | 300 V/600 V |
| PB830 - EOL/obsolete* | 300 MHz | x10, for Siglent handheld oscilloscopes | 10 MΩ | CAT II 1000 V, CAT III 600 V |
| PB925 | 250 MHz | x10, for Siglent handheld oscilloscopes | 10 MΩ | CAT II 1000 V, CAT III 600 V |
| SP2030A - EOL/obsolete | 300 MHz | x10 | 10 MΩ | 600 V |
| SP2035 | 350 MHz | x10 | 10 MΩ | CAT II 300 VRMS |
| SP2035A | 350 MHz | x10 | 10 MΩ | CAT II 400 VRMS |
| SP3050A | 500 MHz | x10 | 10 MΩ | CAT II 400 VRMS |
| SP3150A - for SDS6204A only | 500 MHz | x10 | 10 MΩ/11pF | CAT II 400 VRMS |
| SAP1000 | >1 GHz | Active probe, probe attenuation factor 1/10 | 1 MΩ/1.2 pF | Active probe with SAPBus interface |
| SAP2500 | >2.5 GHz | Active probe, probe attenuation factor 1/10 | 1 MΩ/1.1 pF | Active probe with SAPBus interface |
| SAP2500D | >2.5 GHz | Active differential probe, probe attenuation factor 1/10 | 200 kΩ (differential), 100 kΩ (single-ended), 50 kΩ (common mode)/1.0 pF | Active probe with SAPBus interface |
| SAP5000D | DC...>5 GHz | Active differential probe, 1/10 | Single-ended 10 kΩ; differential 20 kΩ, 400 fF | Offset range ±12 V; input dynamic range ±2.5 V; damage voltage 20 V |
| SAP4000P | 4 GHz | 1.1:1 | Low frequency 20 kΩ, high frequency 50 Ω | Power rail probe; offset voltage range ±24 V; dynamic range ±600 mV |
| SP6150A | 1.5 GHz | 10:1 | Input resistance 500 Ω, input capacitance 1.8 pF | Passive probe; max. input voltage 8.5 V |
* replacement: PB925.
Probe Accessories and Kits
| Model | Description |
| SAP-ST1 | 5 pcs in a box, straight tip, for SAP1000, SAP2500, SAP2500D; the straight tip is rugged and designed for general probing. Fits in either probe socket |
| SAP-PT | 5 pcs in a box, pogo tip for SAP1000, SAP2500, SAP2500D; the pogo tip provides z axis compliance. The tip can fit into a socket or via and onto an IC leg |
| SAP1-Kit | Probe kits for SAP1000, SAP2500 including 5x straight tip, 5x pogo tip, L in adaptor, Z ground, Y lead adaptor, right angle pin lead 5 cm/6 cm/10 cm/12 cm, 1x channel ID clips (set of 4 colors) |
| SAP2-Kit | Probe kits for SAP1000, SAP2500 including 5x straight tip, 5x pogo tip, L in adaptor, Z ground, Y lead adaptor, right angle pin lead 5 cm/6 cm/10 cm/12 cm, 2x channel ID clips (set of 4 colors) |
| SPL-C1 | Logic probe clips for SPL2016 |
| SAP5000D accessories | |
| DBT-50 | Adjustable pin head, SMP interface, connected to the probe amplifier |
| SAP5-KIT | Includes 20 lead resistors, 1x 10 cm ground wire, 1 m of silver wire, 2x swivel tips, 5x straight tips, 5x pogo tips, 1 set of color rings, and 10 pieces of 3M double-sided tape |
| SMA-50 | SMP interface, connected to the probe amplifier. The other end is SMA female |
| SAP5-DRP45 | Includes 1x socketed head DRP-45, 2x swivel tips, 5x straight tips, 5x pogo tips |
| SAP5-DSI50 | Includes 1x solder-in head DSI-50, 20x lead resistors, 1 m of silver wire |
| SAP5-SRP45 | Includes 1x socketed head SRP-45, 2x swivel tips, 5x straight tips, 5x pogo tips |
| SAP5-SSI50 | Includes 1x solder-in head SSI-50, 20x lead resistors, 1 m of silver wire |
| PP301 | Positioner |
Customers also bought
