Rohde&Schwarz NGC100 1-/2-/3-Channel Power Supplies
Description
Files/Downloads
Benefits of the NGC100 DC Power Supplies up to 32 V/10 A/100 W
- 1-channel model and models with 2 or 3 identical channels.
- Protective functions OVP, OCP, OPP, OTP.
- USB and LAN/Ethernet, versions with GPIB/iEEE488.
Rohde&Schwarz NGC100 1-/2-/3-Channel Power Supplies
Models R&S NGC101, NGC101-G, NGC102, NGC102-G, NGC103, NGC103-G Power Sources
The Rohde&Schwarz NGC100 series consists of three models, all with a maximum total power of up to 100 W. The devices have a continuous voltage range from 0 V to 32 V. The single-channel NGC101 delivers a maximum current of 10 A, the two-channel NGC102 a maximum current of 5 A, and the three-channel NGC103 a maximum current of 3 A per channel.
- Maximum total power up to 100 W.
- 1-, 2-, or 3-channel versions.
- Continuous voltage range from 0 V to 32 V.
- Maximum current of 10 A (1-channel model), 5 A (2-channel model), or 3 A (3-channel model) per channel.
- Outputs galvanically isolated, floating and protected against overloading and short circuits.
- Electrically equivalent outputs of the two-channel and three-channel models enable users to connect multiple outputs in parallel or in series to increase the voltage for up to 96 V or current for up to 10 A.
- Easy synchronization of outputs, waveform tests, and data logging for in-depth analysis.
- Remote sense terminals.
- External trigger input.
- Analog control interface.
- USB and LAN/Ethernte interface; version "G" with additional GPIB/IEEE488 interface (GPIB interface is not retrofittable).
- Wide range of generic and broad Applications:
- Simply suppling a DUT with the required voltages.
- General purpose: Very intuitive interface, quiet operation, space efficient, very versatile.
- Research and development: Powering the rails of a high-end FPGA requires several channels with high current capabilities.
- Manufacturing and ATE various interfaces, space efficient, remote capabilities, rack-mountable.
Model Overview
| Model | R&S NGC101 | R&S NGC101-G | R&S NGC102 | R&S NGC102-G | R&S NGC103 | R&S NGC103-G |
| 3657.2288.02 | 3657.2288.03 | 3657.2359.02 | 3657.2359.03 | 3657.2413.02 | 3657.2413.03 | |
| Number of channels | 1 | 2 | 3 | |||
| Voltage range | 0...32 V | 0...32 V | 0...32 V | |||
| Current | Max. 10 A | Max. 5 A per channel | Max. 3 A per channel | |||
| Power | Max. 100 W | Max. 100 W total/50 W per channel | Max. 100 W total/33W per channel | |||
| Resolution | Up to 1 mV/0.1 mA | |||||
| Voltage ripple and noise(20 Hz to 20 MHz) | <1 mVRMS (meas.);<5 mVpeak-to-peak (meas.) | <450 µVRMS (meas.); <4 mVpeak to peak (meas.) | ||||
| Load recovery time | <1 ms (meas.; load change 10 to 90%) | |||||
| Programming resolution | 1 mV/0.1 mA | |||||
| Readback | Resolution 1 mV/0.1 mA; accuracy <0.05% + 2 mV/<0.05% + 4 mA/<0.05% + 2 mA | |||||
| Protective functions | OVP (over voltage protection), OPP (over power protection), OCP (over current protection), OTP (over temperature protection) | |||||
| Additional feature | Output ramp, arbitrary function, remote sensing, channel sequencing, data logging, external trigger, electronic fuse, EasyArb | |||||
| Interfaces | USB, LAN/Ethernet | USB, LAN/Ethernet, GPIB/IEEE488 | USB, LAN/Ethernet | USB, LAN/Ethernet, GPIB/IEEE488 | USB, LAN/Ethernet | USB, LAN/Ethernet, GPIB/IEEE488 |
| Display | 3.5"/8.9 cm QVGA | |||||
| Dimensions (mm) | 222 x 97 x 291; 2.6 kg | |||||
| Replacement for | H&S HMC8041 | H&S HMC8041-G | H&S HMC8042 | H&S HMC8042-G | H&S HMC8043 | H&S HMC8043-G |
Information on product safety:
Manufacturer:
Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 München/DEU
www.rohde-schwarz.com
