Micsig DP Series High Voltage Differential Probes

Micsig DP Series High Voltage Differential Probes

€ 201,11

including VAT plus shipping

min Quantity

1 piece

Unit price

base price

Variants

technical Question?

Please fill in all fields.

Question Type

Your E-mail Adress

My Question:

Please validate that you are not a robot.

I accept the Privacy Policy

Description

Files/Downloads

Micsig DP Series High Voltage Differential Probes

The Micsig DP series are differential high voltage probes for the Micsig tablet/portable oscilloscopes of the (S)ATO, STO, and TO series. They support bandwidths up to 100 MHz and a max. differential test voltage (DC + AC peak) up to 700 V, 1300 V, or 5600 V with switchable attenuation.

Model Overview

Model	DP10007 EOL/discontinued		DP10013		DP20003 EOL/discontinued		DP750-100 EOL/discontinued
Bandwidth	100 MHz
Rise time	≤3.5 ns
Attenuation	x10	x100	x50	x500	x200	x2000	x50	x500
Gain accuracy	±2%
Max. differential test voltage (DC + AC peak)	70 V	700 V	130 V	1300 V	506 V	5600 V	75 V	750 V
Max. input common mode voltage	CAT I 600 V, CAT II 1000 V		CAT II 1000 V		CAT III 1000 V		CAT II 600 V
Input referred noise	≤15 mV_RMS	≤60 mV_RMS	≤40 mV_RMS	≤230 mV_RMS	≤160 mV_RMS	≤920 mV_RMS	≤12 mV_RMS	≤120 mV_RMS
Common mode rejection ratio	≤-80 dB at 50 Hz ≤-50 dB at 1 MHz ≤-60 dB at 20 kHz ≤-40 dB at 10 MHz		>80 dB (DC) >60 dB (100 kHz) >50 dB (1 MHz)		>80 dB (DC) >60 dB (100 kHz) >50 dB (1 MHz)		>80 dB (DC) >80 dB(100 kHz) >60 dB (1 MHz)
Input impedance	8 MΩ/1.25 pF (differential) 4 MΩ/2.5 pF (single-ended to GND)		10 MΩ/1 pF (differential) 5 MΩ/2 pF (single-ended to GND		50 MΩ/1.25 pF (differential) 25 MΩ/2.5 pF (single-ended to GND		8 MΩ/1.25 pF (differential) 4 MΩ/2.5 pF (single-ended to GND)
Output voltage	≤7 V		≤3 V		≤3 V		≤1.5 V
Overrange alarm	Button light/indicator flashes
Power supply	DC 5 V, USB supply. 1.25 W		DC 5 V, USB supply. 0.85 W		DC 5 V, USB supply. 0.85 W		Micsig UPI interface, USB (adaptor). 1 W
Dimmensions (mm)	145 x 60 x 27						Power supply box: 80 x 37 x 22; signal I/O box 49 x 25 13
Cable length	Input cable approx. 45 cm, output cable approx. 90 cm						Input cable 33 mm, output cable 100 mm
Environmental	Operating: 0...40°C, 10...85% rel. humidity

Information on product safety:

Manufacturer:
Shenzhen Micsig Technology Co., Ltd., 6F, Jinhuanyu Building, No. 56, Tiezai Rd, Bao'an District, Shenzhen, Guangdong/CHN
www.micsig.com

Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meihaus.com

Datasheet_Micsig-DP750-200_en.pdf

Datasheet_Micsig_Accessories_en.pdf