Gossen Metrawatt M525R PROFiTEST H+E EXPERT CHECK Diagnostic Tester for AC Charging Points

Benefits of the M525R Diagnostic Tester and Test Adaptor for AC Charging Points per IEC 61851-1, VDE 0122-1

• Diagnostics and test adaptor in one.
• Testing AC charging points in accordance with IEC 61851-1, VDE 0122-1.
• Ideal for mobile use.

Gossen Metrawatt M525R PROFiTEST H+E EXPERT CHECK Diagnostic Tester for AC Charging Points

The Gossen Metrawatt M525R PROFiTEST H+E EXPERT CHECK is a diagnostic tester and test adaptor for 1-phase and 3-phase AC charging points in accordance with IEC 61851-1 (VDE 0122-1) with a type 2 plug and earthed socket. The M525R is used for testing AC charging points in charging mode 3 on type 2 sockets or with a permanently attached type 2 cable.
The tester also enables further electrical testing of the charging infrastructure. For this purpose, the PROFITEST H+E EXPERT CHECK is combined with devices from the PROFITEST MF or PROFITEST MASTER IQ series. For a safe future of e-mobility!

• Diagnostics and test adaptor in a single instrument.
• Display of positive and negative PWM voltages.
• Testing for PE interrupt with display of time to trip in accordance with VDE 0122-1 (IEC 61851-1).
• Ideal also for mobile applications.
• Intuitive operation with display of results in plain text.
• Error display with results for forwarding to service personnel.
• Applications: Service and maintenance of the AC charging infrastructure. Test the functionality, electrical safety and personal protection.
• Testing of 1- and 3-phase AC charging points in charging mode 3.
• Connection to the charging socket or the type 2 plug of an AC charging point.
• Checking of vehicle states (CP states A, B and C), as well as phases, phase sequence, duty cycle and frequency.
• Settings for maximum current carrying capacity of the charging cable (PP): 13, 20, 32, or 63 A and NC.
• Fault simulation: diode test, CP-PE short-circuit (CP state E) and PE interrupt (standards-compliant interrupt with display of tripping time).
• Measurement inputs and earthing contact socket for connecting a test instrument and an external load.
• 4 mm safety sockets.
• Measuring category CAT III 300 V.
• USB port for charging the battery.
• Multilingual (German, English, French).