Drago DT45000 Programmable Temperature Transmitter
€
214,20
including VAT
plus shipping
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Accessories
Files/Downloads
Benefits of the DT45000 Measurement Amplifiers for RTDs, KTY, Thermocouples and others
- Input for RTDs, KTY, thermocouples and other sensors/signals.
- 3-way isolation.
- Rugged, DIN-rail mountable, compact modules.
Drago DT45000 Programmable Temperature Transmitter
The programmable transmitter is designed for operating various industrial sensors. The measured values are converted into a current or voltage signal. The configuration can be done either via DIP switch for preference measuring ranges or extensive ranges via an USB-interface with the PC configuration program PARAset. The 3-way isolation guarantees reliable decoupling of the sensor circuit from the processing circuit and prevents linked measurement circuits from influencing each other. The auxiliary power can either be supplied via the connection terminals (S) or via the In-Rail-Bus connector (B).
- Compact, programmable, DIN-rail mountable temperature transmitter.
- Configuration via DIP switch or extensive ranges via an USB-interface with PC configuration program PARAset.
- 3-way isolation guarantees reliable decoupling of sensor circuit from processing circuit.
- Sensor inputs:
Pt100, Pt200, Pt500, Pt1000 (span min. 50 K).
Ni100, Ni200, Ni500, Ni1000 (span min. 50 K).
KTY (span min. 50 K).
Resistor (100 Ω).
Sensor current/connection 0.2 mA, 2-/3-/4-wire.
Cable resistance <100 Ω per wire.
Thermocouple type E, J, K, L, N, R, S, T, U / B, C, D (span min. 50 K/100 K).
Cold junction compensation intern, extern Pt100, uncompensated, manual setting.
±100 mV, ±1000 mV (span min. 5 mV, 50 mV).
Poti 100 Ω to 50 kΩ (span min. 10%). - Output:
Current 0...20 mA, 0...10 mA | Voltage 0...10 V, 0...5 V.
Current 4...20 mA, 2...10 mA | Voltage 2...10 V, 1...5 V. - Measurement rate: 4/s.
- Power supply: 24 VDC (16.8...31.2 V, approx. 0.8 W). Option B: In-Rail-Bus for power supply.
- Construction: 6.2 mm housing, protection type: IP20. 35 mm DIN-rail mountable.
Other combinations on request!
Included: Module, instructions for use.