Keysight 6811C AC Power Source/Analyzer 375VA

Keysight 6811C AC powers source/power analyzer
Scaled Prices
taking 1 pc.
€ 11.860,73
taking 2 pc.
€ 11.267,69
€ 11.860,73
including VAT free shipping (Germany)
min Quantity
1 piece
Unit price
base price
Item available at short notice. Delivery Time ~10-25 workdays
Item available at short notice. Delivery Time ~10-25 workdays
technical Question?
recommend by email
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Files/Downloads

Benefits of the Keysight 6811C Single-Phase AC-Source and Multifunctional Analyzer

  • Single-phase AC power source and analyzer up to 375 VA. DC output mode 285 W.
  • Max. RMS current 3.25 A.
  • Measurement of AC voltage, current, power, transient measurements.

Keysight 6811C AC Power Source/Analyzer 375 VA

The Keysight Technologies 6811C AC power source and analyzer provides a complete AC test solution. As 375 VA AC sources, it combines the capabilities of a power amplifier and an arbitrary waveform generator. This allows you to simulate normal waveforms and many types of distorted power waveforms. The built in power analyzer combines the capabilities of a multimeter, oscilloscope, harmonic analyzer and power analyzer. These instruments may also be used to produce DC power, either alone or as a DC offset to an AC waveform.

  • Single-phase AC power source with max. power up to 375 VA.
  • Source: Combines the capabilities of a power amplifier and an arbitrary waveform generator.
  • Analyzer: Combines the capabilities of a multimeter, oscilloscope, harmonic analyzer and power analyzer.
  • Voltage range 300 VRMS.
  • Measurement of voltage, current, power. Includes pre-programmed standard waveforms and transient generation system.
  • Flexible interfaces: LAN/LXI Core, USB, GPIB.

Model Overview

Model 6811C
Phases Single-phase
Max. output power 375 VA
AC output mode  
Voltage range 300 VRMS
Voltage setting accuracy 45...100 Hz: 0.15% +0.3 V, >100...500 Hz: 0.5% +0.3 V, >500...1000 Hz: 1% +0.3 V
Max. RMS current 3.25 A
Maximum peak current 40 A
Frequency 1 kHz
Measurement Voltage, current, power
Transients and advanced measurements Includes pre-programmed standard waveforms and transient generation system
DC output mode  
Voltage range 425 V
Max. current 2.5 A
Maximum instantaneous current 40 A
Power 285 W
Interfaces LAN/LXI-Core with remote web interface, USB, GPIB

Note: The recommended calibration interval for these devices is 12 months. Call or send an E-Mail for more information on calibration!

3Y Warranty & Keysight CARE

Agilent’s Electronic Measurement Group is now Keysight Technologies.

Datasheet_Keysight_6810C_en.pdf